zx55 brand logo
Login
  • Stainless Steel Flanges

Stainless Steel Flanges ( 1,998 )

Test Certificate
All Stainless Steel Flanges are shipped with test certificates.
ZX7550
10.0" Nominal Bore JIS B2220 10K Raised Face Weld Neck S10S ASTM A182 F316/L

LA10K21250: Wt: 16 Kg

£ 573.40 ex VAT
ZX7549
8.00" Nominal Bore JIS B2220 10K Raised Face Weld Neck S10S ASTM A182 F316/L

LA10K21200: Wt: 10.1 Kg

£ 360.25 ex VAT
ZX7548
6.00" Nominal Bore JIS B2220 10K Raised Face Weld Neck S10S ASTM A182 F316/L

LA10K21150: Wt: 7.86 Kg

£ 285.40 ex VAT
ZX7547
5.00" Nominal Bore JIS B2220 10K Raised Face Weld Neck S10S ASTM A182 F316/L

LA10K21125: Wt: 5.77 Kg

£ 225.40 ex VAT
ZX7546
4.00" Nominal Bore JIS B2220 10K Raised Face Weld Neck S10S ASTM A182 F316/L

LA10K21100: Wt: 3.89 Kg

£ 140.50 ex VAT
ZX7545
3.00" Nominal Bore JIS B2220 10K Raised Face Weld Neck S10S ASTM A182 F316/L

LA10K21080: Wt: 3.17 Kg

£ 114.15 ex VAT
ZX7544
2.00" Nominal Bore JIS B2220 10K Raised Face Weld Neck S10S ASTM A182 F316/L

LA10K21050: Wt: 2.18 Kg

£ 78.25 ex VAT
ZX6696
200mm PN16 Flat Face Blind Mild Steel S-K Table-D Thickness

FMS168200-D: Wt: 8.56 Kg

£ 69.30 ex VAT
ZX6695
150mm PN16 Flat Face Blind Mild Steel S-K Table-D Thickness

FMS168150-D: Wt: 6.01 Kg

£ 48.70 ex VAT
ZX6694
100mm PN16 Flat Face Blind Mild Steel S-K ('D' THK)

FMS168100-D: Wt: 2.99 Kg

£ 31.30 ex VAT
ZX6693
80mm PN16 Flat Face Blind Mild Steel S-K ('D' THK)

FMS168080-D: Wt: 2.46 Kg

£ 8.05 ex VAT
ZX6692
50mm PN16 Flat Face Blind Mild Steel S-K Table-D Thickness

FMS168050-D: Wt: 1.68 Kg

£ 25.00 ex VAT
ZX6691
300mm PN16/6 x 313mm Inner Diameter Mild Steel S-K (FULL THK)

FMS166MF300: Wt: 18.86 Kg

£ 101.65 ex VAT
ZX6690
250mm PN16/6 x 262mm Inner Diameter Mild Steel S-K (FULL THK)

FMS166MF250: Wt: 13.98 Kg

£ 75.65 ex VAT
ZX6689
200mm PN16/6 x 213mm Inner Diameter Mild Steel S-K (FULL THK)

FMS166MF200: Wt: 9.54 Kg

£ 51.50 ex VAT
ZX6688
150mm PN16/6 x 161mm Inner Diameter Mild Steel S-K (FULL THK)

FMS166MF150: Wt: 7.02 Kg

£ 36.45 ex VAT
ZX6687
125mm PN16/6 x 136mm Inner Diameter Mild Steel S-K (FULL THK)

FMS166MF125: Wt: 5.33 Kg

£ 33.45 ex VAT
ZX6686
100mm PN16/6 x 110mm Inner Diameter Mild Steel S-K (FULL THK)

FMS166MF100: Wt: 4.32 Kg

£ 27.00 ex VAT
ZX6685
80mm PN16/6 x 90mm Inner Diameter Mild Steel S-K (FULL THK)

FMS166MF080: Wt: 3.6 Kg

£ 23.50 ex VAT
ZX6684
65mm PN16/6 x 75mm Inner Diameter Mild Steel S-K (FULL THK)

FMS166MF065: Wt: 3.4 Kg

£ 21.05 ex VAT
zx55 brand logo
Disclaimer:

Errors and Omissions Excepted.

Any dimensions, tolerances or performance figures shown on this website and any associated documents are for guidance only. For factual figures, reference should be made to the current edition of the appropriate standards where applicable.

Every effort is made to keep the information on this website accurate and up to date. However, zx55.com accepts no responsibility for errors or omissions or for any third party loss or consequences arising from what is published.

The information within this website is based on our present knowledge and experience, and is supplied in good faith.

No liability is accepted by zx55.com. in respect of any action taken by a third party.

The products detailed on this website may be used for a variety of purposes and as zx55.com. has no control over their use. zx55.com. excludes all conditions and warranties expressed or implied by statue or otherwise, as to dimensions, properties and/or their suitability for an application.

Copyright (©) 2008 - 2023 1T Solutions LImited. All Rights Reserved.
Your IP Address: 192.168.0.101 • 2023-01-29 08:04 PM • In-house