zx55 brand logo
Login
  • Butt-Weld Fittings

Butt-Weld Fittings ( 2,473 )

Test Certificate
All Butt-Weld Fittings are shipped with test certificates.
ZX7612
4.00" x 1.50" S80S Reducing Tee A403 WP-S 316/L EURO - ERNE

WQBART8100-040S: Wt: 4.83 Kg

£ 300.00 ex VAT
ZX7611
3.00" x 1.50" S80S Reducing Tee A403 WP-S 316/L EURO - ERNE

WQBART8080-040S: Wt: 3.73 Kg

£ 142.05 ex VAT
ZX7609
0.75" x 0.50" S80S Reducing Tee A403 WP-S 316/L EURO - ERNE

WQBART8020-015S: Wt: 0.15 Kg

£ 29.90 ex VAT
ZX7608
4.00" S80S Equal Tee A403 WP-S 316/L EURO - ERNE

WQBAET8100S: Wt: 7.71 Kg

£ 242.90 ex VAT
ZX7607
0.75" S80S Equal Tee A403 WP-S 316/L EURO - ERNE

WQBAET8020S: Wt: 0.2 Kg

£ 28.65 ex VAT
ZX7606
0.50" S80S Equal Tee A403 WP-S 316/L EURO - ERNE

WQBAET8015S: Wt: 0.14 Kg

£ 25.80 ex VAT
ZX7605
4.00" x 1.50" S80S Eccentric Reducer A403 WP-S 316/L EURO - ERNE

WQBAER8100-040S: Wt: 1.86 Kg

£ 116.70 ex VAT
ZX7604
3.00" x 1.50" S80S Eccentric Reducer A403 WP-S 316/L EURO - ERNE

WQBAER8080-040S: Wt: 1.21 Kg

£ 71.55 ex VAT
ZX7603
2.00" x 1.00" S80S Eccentric Reducer A403 WP-S 316/L EURO - ERNE

WQBAER8050-025S: Wt: 0.54 Kg

£ 47.15 ex VAT
ZX7601
1.50" x 0.75" S80S Eccentric Reducer A403 WP-S 316/L EURO - ERNE

WQBAER8040-020S: Wt: 0.35 Kg

£ 40.30 ex VAT
ZX7600
1.50" x 0.50" S80S Eccentric Reducer A403 WP-S 316/L EURO - ERNE

WQBAER8040-015S: Wt: 0.32 Kg

£ 41.60 ex VAT
ZX7596
0.75" x 0.50" S80S Concentric Reducer A403 WP-S 316/L EURO - ERNE

WQBACR8020-015S: Wt: 0.18 Kg

£ 16.85 ex VAT
ZX7595
0.75" S80S 90° Long Radius Elbow A403 WP-S 316/L EURO - ERNE

WQBA9L8020S: Wt: 0.12 Kg

£ 20.10 ex VAT
ZX7594
0.50" S80S 90° Long Radius Elbow A403 WP-S 316/L EURO - ERNE

WQBA9L8015S: Wt: 0.1 Kg

£ 18.65 ex VAT
ZX7593
0.75" S80S 45° Long Radius Elbow A403 WP-S 316/L EURO - ERNE

WQBA4L8020S: Wt: 0.06 Kg

£ 19.65 ex VAT
ZX7592
0.50" S80S 45° Long Radius Elbow A403 WP-S 316/L EURO - ERNE

WQBA4L8015S: Wt: 0.05 Kg

£ 18.45 ex VAT
ZX7108
88.9mm Outer Diameter x 2mm Wall Thickness 90° Elbow ISO 304L (1.5D/R=114)

IC9L080-20: Wt: 0.77 Kg

£ 10.90 ex VAT
ZX7107
219.1mm Outer Diameter x 3mm Equal Tee (P/T) ISO 316L (L=356 H=120)

IAET200-30: Wt: 5.3 Kg

£ 186.20 ex VAT
ZX7106
60.3mm Outer Diameter x 2mm Wall Thickness 90° Elbow ISO 316L (1.5D/R=76)

IA9L050-20: Wt: 0.34 Kg

£ 5.70 ex VAT
ZX8537
24.0" S10S Taft End 304/L (H=26mm/5.0)

BCTE600: Wt: 4.71 Kg

£ 100.00 ex VAT
zx55 brand logo
Disclaimer:

Errors and Omissions Excepted.

Any dimensions, tolerances or performance figures shown on this website and any associated documents are for guidance only. For factual figures, reference should be made to the current edition of the appropriate standards where applicable.

Every effort is made to keep the information on this website accurate and up to date. However, zx55.com accepts no responsibility for errors or omissions or for any third party loss or consequences arising from what is published.

The information within this website is based on our present knowledge and experience, and is supplied in good faith.

No liability is accepted by zx55.com. in respect of any action taken by a third party.

The products detailed on this website may be used for a variety of purposes and as zx55.com. has no control over their use. zx55.com. excludes all conditions and warranties expressed or implied by statue or otherwise, as to dimensions, properties and/or their suitability for an application.

Copyright (©) 2008 - 2022 1T Solutions LImited. All Rights Reserved.
Your IP Address: 192.168.0.101 • 2022-12-05 08:15 AM • In-house