British Pound
Click flag to change Currency
My Account You are not logged in
Login
 

Categories

Site Search

Information


Back to Index

Y-bearings with a Standard Inner Ring

Y-bearings in the 17262(00)-2RS1 and 17263(00)-2RS1 series, with a standard inner ring, have Normal tolerances for the bearing bore diameter and are located on the shaft using an appropriate interference fit. The only difference between these Y-bearings and deep groove ball bearings in the 62 or 63 series is the sphered outside surface of the outer ring.

Y-bearing with standard inner ring

These Y-bearings are suitable for applications where smooth running is a key operating requirement. These bearings can accommodate heavier axial loads than Y-bearings of any other design.

The SKF range comprises bearings for metric shafts from 17 to 60 mm.


Terminology | Y-bearings with grub screw locking | Y-bearings with an eccentric locking collar | Y-bearings with a tapered bore | Y-bearings with a standard inner ring | Y-bearings with a hexagonal or square bore | Special design bearings | Seals | Dimensions | Tolerances | Radial internal clearance | Cages | Grease fill | Speeds | Shaft tolerances | Rubber seat rings | Axial load carrying ability | Equivalent bearing load | Mounting and dismounting | Designations

Back to Index

This page is still under construction. All bearing information remains the property and copyright of SKF Group.